BEST Fittings Reximex Buddy Bottle Filling Adaptor with Quick Connect

Description

BEST Fittings Reximex Buddy Bottle Filling Adaptor with Quick Connect

Allows you to fully recharge an Reximex buddy bottle whilst off the gun.

Fits all BEST Fittings and OEM Reximex Buddy Bottle Valves and Air Reservoirs / Air Tubes.

Instructions for use:

1. Partly screw the adaptor into the valve of the buddy bottle to be filled. If air starts to vent through the adaptor, simply back off until it stops.
2. Connect the filling equipment Foster Style snap connector to the BEST Fittings Reximex Buddy Bottle Filling Adaptor via the quick connect nipple.
3. Close the bleed valve on the filling equipment.
4. Now fully screw the adaptor into the buddy bottle valve using light thumb pressure against the control bar as required. You may feel slight resistance once the fill valve opens, and the pressure gauge on the filling equipment may register the contents pressure of the buddy bottle.
5. Fill the buddy bottle to the desired pressure in the normal way, and close the filling equipment valve.
6. You can now vent the filling system to depressurise the filling adaptor and hose. If air continues to vent after a couple of seconds you may need to unscrew the filling adaptor a little further to take the pressure off the fill valve pin.
7. You can remove the adaptor without causing any damage to the buddy bottle without venting the filling equipment, but this is not recommended as there will be quite a lot of air escaping from the filling equipment.

SKU: 03R2-ML02